Promo Detail: Come and enjoy items at $15 when you purchase on kiddinnovativedesign.com. Time is limited. Act now!
Can I adjust the trigger pull weight myself?
Their two stage trigger weight is adjusted by turning the 1/16th hex wrench in the rear of the trigger clockwise to increase the weight and counterclockwise to decrease the weight. The top screw sets the weight on the 1st stage; the bottom screw (#135) sets the weight on the 2nd stage. When adjusting the weight, there is no need to adjust the .050 set screws on the side or the outer-rim slotted screw around the 1/16th hex. (See more instructions on the customer service page.)
Their single stage trigger weight is adjustable via the plunger protruding out of the trigger guard in back of the trigger blade. In order to access this plunger, the hammer must be up. To increase the weight turn the 1/16th hex clockwise; this is a bit of a blind hole. (See more instructions on the customer service page.)
Do I need the receiver pin kit when I buy a KIDD receiver?
You will only need to purchase the receiver pins not the receiver pin kit because their receiver is already countersunk to take their receiver pins. The kit is needed to countersink a factory receiver or clone so that the screw heads will be flush with the outside of the receiver.
Do I want a straight or curved trigger?
Two stage trigger: A curved trigger works with every type of stock and is highly recommended in a sporter style stock. A straight trigger is a great addition to a target stock with a pistol grip or the thumb hole style stock (benchrest, silhouette). The straight trigger allows for a more natural placement of your trigger finger with the specified stocks.
Single Stage trigger: has one trigger style and it comes in the same color as the trigger guard, they did a hybrid type style between curved and straight for this trigger blade.
If you are unable to ship out of the country, how do your dealers get your products?
Their international dealers go through an exporter in the United States. They ship to the exporter and the exporting process begins.
